WODAPLUG WDS504G-E-R410 4GE EPON ONU
Brief Views
EPON ONU WDS504G-E-R410 is designed mainly for FTTH ,FTTO application. EPON ONU FD504G-E support 1000Base-PX20+ standard with 1:64 maximum optical splitting ratio and 20km distance, and provide 1uplink GE PON port.
ONU WDS504G-E-R410 together with OLT could realize flexible network structure and maintenance and provide total FTTx solutions.
ONU WDS600-104GH has 1 PON port , 4*10/100/1000 BASE-T ports .
WDS504G-E-R410 series is Wodaplug´s for broadband access market based on the introduction of EPON technology passive optical network terminal products. Its with EPON OLT are used together to provide a complete broadband access solution.
EPON technology is a kind of emerging technology which takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements.
WDS600-104 series fully meet IEE802.3ah and CTC3.0 standard protocol. It has good third-party compatibility to work with the third party OLT, It supports 1Gbps transmission rate up and down and provides users with good QOS, flexible bandwidth allocation of Ethernet services and IP integrated service.
Functional Feature
n Support port-based rate limitation and bandwidth control;
n In compliant with IEEE802.3ah Standard
n Wi-Fi series meet 802.11 n/b/g technical standards
n Up to 20KM transmission Distance
n Support data encryption, group broadcasting, port Vlan separation ,etc.
n Support Dynamic Bandwidth Allocation (DBA)
n Support ONU auto-discovery/Link detection/remote upgrade of software;
n Support port mode of VLAN configuration
n Support power-off alarm function ,easy for link problem detection
n Support broadcasting storm resistance function
n Support port isolation between different ports
n Support port flow control
n Support ACL and SNMP to configure data packet filter flexibly
n Specialized design for system breakdown prevention to maintain stable system
n Support software online upgrading
n EMS network management based on SNMP ,convenient for maintenance
Specification
|
Item
|
Parameter
|
|
PON Interface
|
1 EPON optical interface
Meet 1000BASE-PX20+ standard
Symmetric 1.25Gbps upstream/downstream
SC single-mode fiber
split ratio: 1:64
Transmission distance 20KM
|
|
User Ethernet
Interface
|
4*10/100M or 4*10/100/1000M auto-negotiation
Full/half duplex mode
RJ45 connector
Auto MDI/MDI-X
100m distance
|
|
Power Interface
|
12V DC Power supply
|
|
PON
Optical
Parameter
|
Wavelength: Tx 1310nm, Rx1490nm
Tx Optical Power: 0～4dBm
Rx Sensitivity: -27dBm
Saturation Optical Power: -3dBm
Connector Type: SC
Optical Fiber: 9/125ɥm single-mode fiber
|
|
Data Transmission
Parameter
|
PON Throughput: Downstream 950Mbps; Upstream 930Mbps
Ethernet: 100Mbps or 1000Mbps
Packet Loss Ratio: <1*10E-12
latency: <1.5ms
|
|
Business
Capability
|
Layer 2 wire speed switching
Support VLAN TAG/UNTAG，VLAN conversion
Support Port-based speed limitation
Support Priority classification
Support storm control of broadcast
Support loop detection
|
|
Network
Management
|
Support IEEE802.3 QAM, ONU can be remotely managed by OLT
Support Remote management through SNMP and Telnet
Local management
|
|
Management
Function
|
Status monitor, Configuration management, Alarm management,
Log management
|
|
Shell
|
Plastic casing
|
|
Power
|
4FE: <3.9W, 12V/0.5A power supply adapter
4FE+WIFI: <4.9W, 12V/0.6A power supply adapter
4GE: <4.3W, 12V/0.5A power supply adapter
4GE+WIFI: <5.3W, 12V/0.6A power supply adapter
|
|
Physical
Specifications
|
Item Dimension：160mm(L) x 120mm(W) x 32.5mm (H)
Item weight：0.2kg
|
|
Environmental
Specifications
|
Operating temperature: 0 to 50ºC
Storage temperature: -40 to 85ºC
Operating humidity: 10% to 90%(Non-condensing)
Storage humidity: 10% to 90%(Non-condensing)
|
|
