WPJ419HV Wasabi Board
IPQ4019 Dual Band 802.11ac MU-MIMO Onboard WiFi Radio Embedded Board
- this board is not available now, please use Wallys DR4029 board instead.
- Qualcomm Atheros IPQ4019 710MHz CPU
- 2×2 On-board MU-MIMO 2.4GHz WiFi radio, up to 300Mbps physical data rate
- 2×2 On-board MU-MIMO 5GHz WiFi radio, up to 867Mbps physical data rate
- MicroSD card slot for expandable storage
- MiniPCIe slot for 3rd WiFi radio support
IPQ4019@710MHz
ARM v7 |
256MB DDR3
16MB |
1x Mini PCI-e Slot
2x GE Port
2x U.FL Connector
1x SIM Holder |
2.4GHz 802.11b/g/n
5GHz 802.11ac/a/n
Up to 300Mbps@2.4G
Up to 867Mbps@5G
23dBm@2.4G (per chain)
23dBm@5G (per chain) |
12V DC
IEEE 802.3af/at PoE |
Specification Table
| Product Type |
Embedded Board |
|---|
| Chipset |
IPQ4019 |
|---|
| Frequency |
2.412~2.472GHz
5.180~5.825GHz |
|---|
| Reference Design |
DK04 |
|---|
| System Memory |
256MB (supports up to 1GB) |
|---|
| NOR Flash |
16MB (max 32MB) |
|---|
| Interface |
2x Gigabit Ethernet LAN RJ45 Port with Auto MDI-X
1x Mini PCI Express v2.0 Slot at 9.2mm Height, uses USB 2.0 signals
1x Serial Port 4 Pin Connector (UART)
1x Serial Port 6 Pin Connector (High Speed UART)
1x JTAG 20 Pin Connector
1x USB 3.0 Port |
|---|
| LED |
3x LED Indicators : 1x Power and 2x LAN Activity Indicators |
|---|
| Reset Button |
1x F/W Reset Button |
|---|
| Operating System |
QCA Reference Firmware, OpenWRT v18.x |
|---|
| Certification |
RoHS Compliance |
|---|
| Power Consumption |
11.75W (Max) |
|---|
| Extra |
Supports Dynamic Frequency Selection (DFS) |
|---|
| Temperature Range |
Operating: -20ºC to 70ºC, Storage: -40ºC to 90ºC |
|---|
| Humidity |
Operating: 5% to 95% (non-condensing) |
|---|
| Dimension |
120 x 105 x 15 mm
|
|---|
APPLICATIONS
802.11n/ac MU-MIMO Access Point Point-to-MultiPoint High Capacity Wireless Bridge Transportation Access Point
Specifications :
Chipset CPU: Qualcomm Atheros IPQ4019 Quad-core ARM Cortex-A7 710 MHz
Reference Design DK04
System Memory 256MB (supports up to 1GB) NOR Flash 32MB
Wireless On-board 2x2 2.4GHz 802.11b/g/n, max 23dBm per chain, and On-board 2x2 5GHz 802.11a/n/ac, max 23dBm per chain, 2x U.FL connectors, diplexer allows dual band concurrent operation
Frequency Range 2.412~2.472GHz and 5.180~5.825GHz,
simultaneous dual band Modulation Techniques 802.11b : DSSS (DBPSK / DQPSK / CCK) 802.11a/g : OFDM (BPSK / QPSK / 16-QAM / 64-QAM) 802.11ac/n : OFDM (BPSK / QPSK / 16-QAM / 64-QAM / 256-QAM)
Interface 2x Gigabit Ethernet LAN RJ45 Port with Auto MDI-X 1x Mini PCI Express v2.0 Slot at 9.2mm Height with PCIe and USB 2.0 signals 1x Serial Port 4 Pin Connector (UART)1 1x Serial Port 6 Pin Connector (High Speed UART) 1x JTAG 20 Pin Connector2 1x USB 3.0 Port Reset Button 1x F/W Reset Button LED 3x LED Indicators : 1x Power and 2x LAN Activity Indicators
Power over Ethernet IEEE 802.3af (48V) / IEEE 802.3at (56V) and Passive PoE 36~56V DC, Supply PSE for pass-through (IEEE 802.3at) DC Power 1x
DC Jack Connector : 12V, 2A Operating Voltage 3.3V, 5V (for PA), and 12V Power Consumption 11.75W (Max)
Supported Operating System QCA Reference Firmware, OpenWRT v18.x
Certification RoHS Compliance
Environmental Temperature Operating : -20ºC to 70ºC , Storage : -40ºC to 90ºC
Environmental Humidity, non-condensing Operating : 5% to 95% , Storage : Max. 90%
Dimensions (W x H x D) 120 x 105 x 15 mm
Extras 1x SIM Card Slot, 1x MicroSD Card Slot
Other Features Supports Dynamic Frequency Selection (DFS) 1.The Serial Port is a 4-pin header (TTL). A Serial Converter is available to change the TTL signals on the board to RS-232 signals for debugging. 2.The JTAG Port is a 20-pin header. A JTAG kit is for writing you
){kind=link}